GuitarTools practical guide
Test guitar effects without an audio interface
You can explore effect order and compare pedal settings without plugging a guitar into your computer. The Multi-Effector has three simulator sources: built-in guitar samples, synthesized chord sounds, and an MP3 you provide. They are useful for trying the tool, but they do not replace the response of your own guitar, pickups, amplifier, or playing technique.
Start with a built-in source
- Open the Multi-Effector.
- Choose a starting point from Settings → Templates, or leave the current pedal chain in place.
- Open the input simulator by selecting the Input node on the pedalboard.
- Choose a sample guitar solo or a synthesized chord in the simulator. A sample is useful for hearing a more varied phrase; a chord is a quick way to compare how a full voicing passes through the chain.
- Close the simulator and use the Input node’s play control to start the selected source.
- While it plays, adjust one effect at a time and compare bypassed and active sound.
The simulator routes its selected audio through the current effects chain. Select a different sample or chord to change the test material; stop playback with the same simulator control before switching sources.
Use your own MP3
If you have a suitable MP3 that you are allowed to use, open the Input simulator, choose the MP3 upload option, and select the file. Once it has loaded, make the upload the active source and start playback from the pedalboard’s Input node. The tool keeps the selected upload available in the current browser app state for repeated testing; avoid uploading private or sensitive recordings on a shared device.
For a useful comparison, pick a short passage with a clear note attack and some sustain. Keep the source and output level consistent while changing one pedal parameter at a time. This makes it easier to hear whether a change affects attack, sustain, brightness, modulation, or the amount of ambience.
What the simulator can and cannot tell you
A simulator is especially helpful for learning the order of effects, checking that a chain is active, and making broad comparisons. A rendered sample is already a recorded performance, so it will not react to your pick attack, guitar volume knob, or pickup selection like a live instrument would. A synthesized chord is a simple test signal, not a complete model of a guitar and amplifier rig.
Use simulator results as a starting reference. To evaluate how a setting responds to your actual instrument, connect a compatible audio input and compare at a comfortable listening level. The tool models a pedal-style effects chain; it does not reproduce every part of a physical amplifier or room.
Try a signal-chain comparison
Load a sample, then compare Drive → Delay with Delay → Drive. Listen for whether repeats remain distinct or become more saturated as they pass through the drive stage.
Read the pedal-order guide →Common questions
Do I need to grant microphone access for simulator playback?
No microphone input is needed to play a built-in sample, synthesized chord, or uploaded MP3. Microphone permission is relevant when detecting or connecting live audio devices.
Why does my uploaded MP3 not play?
Confirm that the upload completed and is selected as the active simulator source. If playback still fails, try another MP3 file; unsupported or damaged audio may not decode in the browser.